RTS ODIN32

112,805 kr ex VAT
  • A robust digital matrix in a compact 1RU space
  • Built-in OMNEO technology
  • Redundant power supplies
  • Front panel user interface gives easy access to the most common configuration tasks to allow quick modifications to the system
  • Energy-efficient design, uses less than 50W of power

SKU F.01U.329.397 Categories ,


Share
Description
Power Supply:
Type Locking IE320 C14 style connector (2 connectors, fully redundant load-sharing power supplies)
AC Input 100VAC – 240VAC, 60/50Hz, 0.5A / 0.35A
Maximum Power Consumption 47W (based on 120VAC)
Note: Lighted power buttons on front panel control DC voltage feed to internal circuitry; they do not disconnect AC from the internal power supplies. Power cords must be fully removed from unit to safely disengage internal power.
Environmental:
Operating Temperature 32°F – 113°F (0°C – 45°C)
Storage Temperature -4°F – 158°F (-20°C – 70°C)
Dimensions: 19″ w/ rack ears (17.3″ w/o rack ears) W x 1.7″ H x 14.3″ D (including connectors) (482.6 mm w/ rack ears [439 mm w/o rack ears] W x 43.7 mm H x 363.5 mm D [including connectors])
Weight:
ODIN Matrix 11.5lbs (5.2kg)
Optional Mounting Bracket 0.86lbs (390grams)
AIO 4-Wire Analog:
Connectors 16 RJ-45 connectors
Signal Format Differential RX/TX audio with differential RS-485 control data
Wiring Scheme Both 568B & USOC supported
A/D and D/A Resolution 24bits
Max Input Level (balanced) +20dBu w/o clipping
Digital Input Gain Programmable (-20dB – +20 dB)
Input Frequency Response +1dB/-3dB from 200Hz – 20kHz
THD+N (8dBu input, unity gain) 0.025% non-weighted@1kHz <0.075% non-weighted, 100Hz – 20kHz
Nominal Input Impedance >22kΩ
Nominal Output Level 8dBu
Digital Output Gain Programmable (-20dB – 20dB)
Maximum Output Level (balanced) @ 600 Ohms 20 dBu w/o clipping
Output Frequency Response +1dB / -3dB from 200Hz – 20kHz
Output Noise Floor <-70dBu
Crosstalk Isolation >80dB
2-Wire Party Line Analog:
Connector two 3-pin female XLR connectors
Modes/Port supported RTS CH1, RTS CH2
Audiocom (1 channel)
Clear-Com (1 channel)
4W/2W Echo Return Loss >30dB
Unbalanced Operation (RTS/Clear-Com)
Output Level 0 dBu (nominal)
Expected Termination Impedance 200 Ω
Noise Contribution <-60 dBu
THD+N (w/ nominal input) <0.5%, 200Hz– 8kHz
Bridging Impedance >10kΩ
CALL Signaling 20kHz (RTS mode)
12VDC (Clear-Com mode)
MIC KILL Signaling 24kHz (RTS mode)
Balanced Operation (Audiocom)
Ouput Level 0 dBu (nominal)
Expected Termination Impedance 300Ω
Noise Contribution <-60 dBu THD+N
(with nominal input) <0.5%, 200Hz – 8kHz
Bridging Impedance >10 kΩ
CALL Signaling 20kHz (Audiocom mode)
MIC KILL Signaling 24kHz (Audiocom mode)
General Purpose Input/Output Ports:
Relays
Type SPDT
Contacts Common (C)
Normally Closed (NC)
Normally Open (NO)
Contact Rating 1A @ 30 VDC
Inputs
Type Optically Coupled
Input Voltage 5 VDC – 12 VDC on A+
Note: A+ is internally pulled to +5 VDC. Connect K to chassis ground to activate.
PAP/LCP/GPIO Port:
Connector RJ-45
Format RS-485 control data only (no audio)
Inter-Frame Link Port
(2 UPLINK/2 DOWNLINK):
Note: Supports expansion and connection of up to eight ODIN frames.
Fiber Connector Type Small Form
Factor Pluggable (SFP)
Multimode Finisar FTLF8519P3BNL 500m / 2.125Gbps
Single Mode Finisar FTLF1421P1BTL 15km / 2.67Gbps
Speed 2Gbps
LED Indicator Optical Signal Present
Note: SFF-8472 fiber diagnostics supported
Control Port:
Connector RJ-45
Format IEEE 802.3 compliant
Speed 10/100/1000 Mbps
LEDs Speed and Link/Activity
Sync Input Port:
Connector BNC
Termination Impedance 75 Ω
Input Frequency Range 48 kHz ±25 ppm
Input Level 5V TTL
Compatible OMNEO Port (primary and secondary):
Maximum Capacity 128 Full-duplex ports
Copper Connector Type RJ-45
Format IEEE 802.3 compliant
Copper Ethernet Speed 100/1000 Mbps
Fiber Connector Type Small Form Factor Pluggable (SFP)
Multimode Finisar FTLF8519P3BNL 500m / 2.125Gbps
Single Mode Finisar FTLF1421P1BTL 15km / 2.67Gbps
Fiber Speed 100/1000Mbps
LED Indicator Optical Signal Present
Note: SFF-8472 fiber diagnostics supported
TFT Display:
Active Area 120.10 mm (wide) x 18.77 mm (high)
Dot Resolution 576 x 90 pixels
Color Resolution 16-bit (64K) RGB color
View Angle 80° (typical, all directions)
Protective Lens Anti-Glare / Anti-Reflective
Front Panel Management Port:
Connector RJ-45
Format IEEE 802.3 compliant
Speed 10/100/1000 Mbps
LEDs Speed and Link/Activity
Agency Compliance: Emissions (Class A)
• EN 55032:2012/AC:2013
• KN32 w RRA Public Notification 2016-26 & RRA Announce 2016-79
• AS/NZS CISPR 32:2015
• VCCI-CISPR 32:2016
• ICES-003, Issue 6:2016, Updated April 2017
• FCC Part 15 Subpart B
• Chinese National Standard 13438 (2008) Immunity
• EN55024:2010
• KN32 w RRA Public Notification 2016-26 & RRA Announce 2016-79 Safety
• UL 60950-1 and CAN/CSA C22.2 No.60950-1-07
• UL 62368-1
• Japanese PSE compliance

Privacy Preference Center